Updated: July 6, 2023
Sovol Filament Dryer is designed for drying filament, it is able to remove the moisture from the filament and restore the good printer quality of filament. As we all know, the filament is easy to absorb the moisture in the air, after the filament get humid, you may have the print issue such as strings, bubbles, uneven extrusion lines and unable to get good print quality no matter how perfect is your printer. Even the hot end may get clogged, that is really disppointing. Therefore, the filament dryer, is very essential for every 3d printer owners. For such an important accessories, we gave it more better features as we can.
Large Capacity:
Compared to other filament dryer, Sovol filament dryer can store 2 spools filament with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Which is a very good news for 3d printer owners, it satified more people who have more different demands, like people who usually print with 2 KG/ Roll, people who have two or more single extruder 3d printer, people who have IDEX 3d printer.
Adjustable Temperature & Time:
The temperature and time both are adjustable, when you hit the function button , you can set the temperature 40 c, 45c or 50c, hit up button to adjust the temp. When you hit the function button again, you can set the time from 6h to 12 h, hit the up botton, you can adjust the drying time.
Humidity Display:
The humidity will show the humidity of the filament dryer box real-time, it is very convenient for users to take a reference about the humidity of the filament.
Excellent Sealing Storage Function:
There is a transparent silicone spacer in the edge of the box, after you lock the lid and close the 2 teflon outlets, the filament can be stored in an vacuum enviroment for a long time, no need power on. We suggest you put 4 bags of desciccants (not included in the package) inside the dryer box to improve drying efficience & quality.
Two Teflon Outlets:
There are two outlets made with teflon material, which makes the filament be loaded more smooth from the filament dryer to the extruder. And when you use the filament dryer for storing filament, you can close these two outlets, when you use it for drying, you can open it for letting the moisture flow out to the air. It is a little design, but make the product much special.
Two Locking Clips:
Two locking clips can lock the lid very tight, and gurantee that lip won’t pop up because of the pull strength of extruder when it is printing . You can use the filament dryer as a filament holder and print without any worries.
| Model Number | SH01 |
|---|---|
| Item Type | Filament Dryer Box |
| Brand Name | Sovol |
| Origin | Mainland China |
| Color | White |
| Weight | 1.1Kg |
| Material | PC+ABS |
| Output Voltage | 12V |
| Input Voltage | 100V~240V 50/60Hz |
| Power | 48W |
| Operating Temperature | -9℃~85℃ |
15 reviews for Sovol 2 Rolls Filament Dehydrator Spool Holder Filaments Dry Box for 1.75mm, 2.85mm ABS PLA PETG TPU FDM Material 3D Printer
Add a review
Related products
Electronics office
Electronics office
Electronics office
S***v –
Delivery by Ukrmail, the goods have arrived. Checked, it works. Has already managed to refit it for higher heating. I advise you to change the fan to 24 V, snail, with a flow down, to a heater. The flow will be the same, and the noise is much quieter. Glory to Ukraine!
P***s –
Very impressed with how Sovol used laser cut foam inside and outside the drier. One of the best packing I’ve seen from a great manufacturer. Fast delivery that you seller.
S***v –
Everything is accurate, all by the hour. Having dried the PETG for 6 years 45 degrees, it stopped rolling, so everything is good.
S***z –
Product description is accurate. Good packaging. I tested only once and it works nice. The width of the roll I tested was larger than the supported width, so I put it on the middle. It didn’t roll freely because the filament hit the shafts stand in the middle, but this is ok as the roll size is larger than the product specs. I’m satisfied with this product.
A***e –
Arrived very fast, very well packed and I am already using it. Recommend!
m***r –
Good build quality product including a fan. Suitable for 2 standard rolls or wide rolls. Fast delivery and good seller.
a***s –
Top D +, solved my moisture problem in the filament
G***z –
Very good. Is very efficient. I’m testing him and it’s been very successful. Use it while printing and the quality of the parts is being very good. I recommend 100%. Very fast delivery. 14 days exactly.
a***a –
It is a good product for what you propose to do and I have nothing to complain about in fact I did not evaluate so well if it works so much to dry some filaments as I did not get any filament needed to be dried more by the That it seems it works well the engines works properly it works for many hours without any different noise and does not appear to have broken so that way I recommend buying the product because believe it when you need it it will be very good I recommend to see too The reviews of the people who use the product because maybe someone will show up with more experience than me to say whether or not it worked within the parameters that he wanted to make work then recommend the purchase of the product looks like a good and durable product
y***r –
Product arrived fast and well packed, works perfectly
y***y –
Works
a***r –
package arrived and was in great shape. product works as expected. great buy. this is my 3rd filament dryer. all are different brands, strictly for research purposes of mine. I shall see how it compares to my other 2 .
M***B –
ok
E***r –
I received the product on time. Works by presenting the temperature and humidity readings, which I really liked. Simple and intuitive programming. Worth the value.
C***a –
The product arrived in good condition, it is well protected from the factory, arrived in good weather. No details, everything working. I recommend the seller.